(liquid) DX-580
Product introduction
DX-580 has high efficient and long term stability and good early color stability.
The pipe is clear, white, delicate and fine with excellent ductility and low-temperature impact strength retention. The wide rang of processing is especially suitable for double-screw extrusion.
Technical specification
|
Items |
Specifications |
Executive standards |
|
Appearance |
Light yellow to Clear oil liquid |
|
|
Color (Pt-Co No.) ≤ |
80 |
GB/T1664 |
|
Density (20°C) g/cm3 |
1.07-1.09 |
GB/T13216.5-1991 |
|
Viscosity (25°C) mPa.S |
120-200 |
GB/T12008.8-1992 |
|
Tin content (%) |
12.5±0.3 |
Iodometry |
Product properties
Stability: It can be used to produce PVC pipe with big caliber owing to the good heat stability.
Process: The excellent high-temperature color stability and long-term dynamic stability provided by DX-181. Without fouling, the time of cleaning equipment is shortened.
Amount: on the same condition, it shows its excellent cost performance.
Safety: The product is high efficient and environment-friendly without any heavy metal.
Applications
PVC-M highly impact pipe
UPVC drinking water pipe, drainage pipe
PVC electrical pipe
PVC communication pipe two-wall rippled pipe, slat wall pipe, grid pipe
Rigid sealed strip
User notice
Package: The product is packed into iron bucket with plastic coating or plastic bucket, and the net weight is 220kg per bucket.
Transportation: The product is the heat stabilizer for processing PVC, and it is non-flammable and non-explosive.
Storage: The iron bucket should be placed in cool and dry area with the storage temperature from 5 to 30°C. The bucket should be sealed immediately after use.
Safety: Avoid any contact with mouth, eyes and skin. In case of contact with skin, wash thoroughly with soap and water immediately. In case of contact with eyes or mouth, flush with water immediately and get medical attention. The work place should be ventilated so as to avoid inhaling evaporated gas directly in the production operation.
Environment: According to environment safety standards of Occupational Safety & Health Administration (OSHA), including the standard of tin use for all the industries. TWA (eight hours average value) is 0.1mg/m3 (tin); short-time exposure value is 0.2mg/m3
Note: The product contains sulfur. When it is mix-used with lead salt stabilizer, the product produced with the two stabilizers will become grey black. In order to maintain white, it shouldn’t be mixed.
Warranty period: 12 months
